3 -  1:20.3 Sections Shown
BVRR Specialties has developed a highly efficient product to store large scale rolling stock, including
heavy locos. This storage system is suitable for virtually ALL No.1 gauge scales including: 1:20.3,
1:22.5, 1:24, 1:29 and 1:32. This system will accommodate ALL these scales even if they are mixed and
matched. The system consists primarily of an MDF (medium density Fiberboard) deck with 45mm
flangeways on appropriate centerlines. Although the decks are available individually in a number of
widths and depths, the best way is to utilize them with the easy to assemble (no nuts, bolts or clips)
framing system fabricated from 16 gauge, pre-painted, cold-rolled steel. This system is economically
priced and is suitable for indoor storage at home, garage, shed, barn, etc. Price for a typical 36" wide
by 24" deep by 6'0" high, 6 shelf system that can hold approximately 42 - 48 cars or locos is only
$250.00 (not including shipping). E-mail or call for a quote on your specific needs.
9 Standard Heights: 3, 4, 5, 6, 7, 8, 9, 10 and 12 feet
9 Standard Depths: 12, 15, 18, 24, 30 and 36 inches
7 Standard Duty Shelf Lengths: 24, 30, and 36 inches
5 Heavy Duty Shelf Lengths: 36, 42, 48, 54 and 60 inches
Welcome to Buttonwood Valley Railroad Specialties
BVRR SPECIALTIES
13 Standard Heights: 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 14, 15 and 16 feet
9 Standard Depths:  18, 24, 30, 36, 42, 48, 50, 54 and 60 inches
7 Standard Shelf Lengths: 3, 4, 5, 6, 7, 8 and 8 feet 2 inches
Standard & Heavy Duty Storage for Locos & Rolling Stock
up to 36" long -
Extra Heavy Duty Storage for Large Locos & Rolling Stock
up to 60" long -
Three Complete Shelf Systems to Safely Store & Inventory Your Rolling Stock & Locos
Low Cost Rivet-Lite for for Locos & Rolling Stock
up to 36" long -
Complete Units 5', 6', or 7' high
Single rivet connection holds up to 675 lbs.
Easy assembly without tools.
Channel-type deck supports snap in with no bolts.
A rounded steel edge for sliding material on and off protects the MDF decking.
No.1 Gauge Storage Systems & Specialty Tools

I recently had a meeting with
the original manufacturer of
the MAXI-GRIP fastener
holder and, although not
currently in production,  we
have found a stash of well
hidden MAXI-GRIPs.

Get yours while they last!

$21.95

Includes USA S&H
Please add $3.00 for foreign
Efficient, Low-cost Storage Systems for Your No. 1 Gauge Trains -
Trains are not included.
Available now...

Example of a "section"
of the "new" No.1
Gauge Storage Track
for up to 1:20.3 scale
as described in text on
the upper right side of
this page and shown in
the photo below.

PROTECT YOUR INVESTMENT!  BVRR Specialties has introduced a NEW product to store
large scale rolling stock including locos. We recognize that shipping costs for our
No.1 Gauge Storage
System
have risen dramatically. This new "F" system works on a similar basis. The primary difference
is
you can use your existing shelving or new shelving you can purchase locally and at much lower
cost.
All "G" equipment can be easily and safely stored on this product. Sections are about 3/8"
thick and will ship in the standard length you specify [18" and 24" are the most popular] and are
available in custom lengths up to approximately 50" long by about 7½" wide. Standard Storage
Sections are available in 18" and 24" lengths. If you provide the exact length you need, e.g; 17½" or 29",
we will be happy to supply them in that length for a nominal custom charge per length. Each piece is  
provided with a pair of routed 45mm storage slots that are "plunge" cut to help prevent roll-off. You can
"gang" up as many as you need to store your equipment. For example, 5 sections can be placed on a
36" wide shelving unit (with minor trimming). Or you can put 4 sections on a 30" wide shelving unit.
There is
no limit to how you can "gang" them up. You can even mount them on wall shelving the full
width of your room! A plus is the ability to "lock" the sections together via a
tongue and groove type
connection
. You can also change your configuration whenever you like. The initial "F" offering will
accommodate up to
Fn3 scale (1:20.3) and all 45mm "scales". See drawing and photo on the left. Cost
per section is only
$1.50 per linear foot. "G" sections, especially for smaller 1:32 - 1:225 scales we
hope to have available in the near future. Look for future product reviews in "
Garden Railways" and
"
Model Railroad News".

These "sections" are not self-supporting. They are meant to be placed on your existing shelves.

SPECIAL MINI MAXI-GRIP OFFER
for BVRR Specialties customers only!

The Mini-Maxi Grip is no longer available
from the manufacturer.
I do have
a few on hand. Order now!


THANK YOU FOR YOUR SUPPORT!
Send $5 US for Sample.
GREAT NEWS!
THE STORAGE SYSTEM IS NOT CURRENTLY AVAILABLE